Camel ADV Yamaha Tenere 700 High Mount Exhaust kit - Rally Bend [Without Muffler]

There can be an issue with the muffler is case of a layover, it's located low and wide and is mounted on a very long exhaust hanger that's welded to the subframe.

When the bike is dropped on the right side, the mount can be bent which allows the muffler to be pushed into the side of the swingarm. If it is not bent back before being ridden, the aluminum swingarm gets chewed up by the steel muffler (see photo below). Adding insult to injury, if you bend the hanger enough times, it can crack at the subframe.

To achieve this, Camel ADV had to make a new link pipe and a new bracket to shorten the very long stock muffler hanger which greatly reduces leverage it sees making it much less likely to be bent in a drop.

The kit includes:

• The 304 stainless, "Lobster-Back", link pipe. We've added wire heel guards for both the rider and pillion.
• Our anodized CNC billet 6061 aluminum clamp. This mounting bracket is simple to install and reduces the hanger length (and leverage by about 50%). *Patent Pending*
• All fasteners, springs, exhaust clamp, graphite seal, and Camel ADV decals.
• 2.1kg/4.5lbs lighter than the stock muffler and link pipe
• Compatible with most pannier racks
• Easy to install with basic hand tools

Pannier compatibility:

• Yamaha OEM
• Touratech Zega
• SW Motech PRO
• Ride ADV Solo racks
• ADV Spec soft bag plates (require 17mm spacers and longer bolts)
• 2nd Gen Outback Motortek Symmetrical and Asymmetrical racks
• Tusk

Before you purchase please view the video below to ensure you understand what's required before mounting your own muffler. Any further questions please give our Adventure Moto staff a call.