Seat Concepts KTM SX/XCF ('16) XCW/EXC-F ('17-'19) SX/SXF/XCF/XC ('17-'18) Element

Seat Concepts proprietary formula provides a more plush and active ride, while still offering the necessary amount of support.

Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider's legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

The cover on this model has seam tape behind all of the stitching to add to the water resistance of the seat cover.

• Width: 18.1cm (7 1/8")
• Height: Same as OEM

Note:
Some 2016 models did not have an indentation in the underside of the seat pan called a pan pocket that provides additional clearance for an electrical module that will be present on TPI models. Our LOW foam and cover kit only works on models WITHOUT the pan pocket. Verify if your stock pan has a pocket if ordering a kit. Our Standard height and Tall models are available as a foam and cover kit, for models with or without a pan Pocket. All standard and tall Seat Concepts 2016-18 KTM Complete seats have pan pockets. Our low seat will NOT work on the TPI models.

Important Information:
Per OEM specifications, the seat bolts should be tightened NO MORE than 7 ft/lbs to prevent tightening or stripping. Over tightening can cause a failure. Cross threading can also be an issue and should be avoided. DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.

• Black/Black/Black (out of stock)
• Black/Black/Orange (out of stock)
• Blue/Blue/Orange (out of stock)

• Complete Seat (out of stock)